Electric Cloth Dryer Ceiling Mount

Product Overview

The smart clothes drying rack is a smart household product that generates driving force through a motor. It mainly consists of a body, a power system, a control system, a lifting system, a drying system, etc. Its basic function is to provide intelligent automated drying for all types of home users.

Suitable for villas, resorts, apartment buildings and various types of mid-to-high-end residential

Areas: Intelligent clothes drying racks have high strength, good transmission efficiency, large load-bearing capacity, smooth and smooth lifting of clothes hangers, built-in overload, automatic shutdown protection system when encountering obstacles, and comprehensive protection of the motor And the safe operation of the wire rope greatly improves the service life of the product. With the new round of technological revolution in the clothes drying rack industry and the continuous improvement of people’s consumption concepts and pursuits, smart clothes drying racks will become an indispensable part of every family.

1.1 Remote control electric lifting system

Automatic lifting control system, easy operation and convenient for family members, movable remote operation, 1 million times service life, super signal wireless remote control, not restricted by any direction or obstacles within 30 meters.

1.2 Air drying/drying function system

Humid weather and rainy weather cause clothes to dry out and become moldy, which brings a lot of inconvenience to you and your family. The intelligent air drying/drying system helps you in the drying process of clothes. The 2-hour automatic shutdown control saves energy and is environmentally friendly and safer.

1.3 Disinfection function system

Rainy and humid weather is the season for germs to breed and multiply. Clothes that are kept damp or out of reach of sunlight for a long time can easily lead to the growth of bacteria in your home, causing harm to you and your family. Start the light wave ultraviolet sterilization and disinfection function, and set the 20-minute timer. It can effectively eliminate and inhibit bacteria, giving you and your family a safe and healthy living environment.

1.4 LED lighting system

In order to facilitate the drying operation at night, LED lights provide lighting to facilitate drying. The LED lighting system is brighter, energy-saving, environmentally friendly, and has a longer service life, adding a beautiful brilliance to your balcony.

1.5 Upper and lower limit overload dual protection devices

Safety design and over-travel double protection device allow you to use it with more confidence. In order to eliminate potential safety hazards caused by undesirable faults and damage to individuals and the machine body, a dual protection system control is adopted. If the control system switch fails, the power supply for the up and down strokes will be turned off, and the up and down strokes will not be able to operate, thus avoiding Losses caused by malfunction.

1.6 Automatic shutdown protection when encountering resistance or overload

The set load-bearing weight of this machine is 35KG. If the load-bearing weight set by this machine is exceeded, the system will automatically detect it and stop running, effectively avoiding damage to other parts due to overload, if it encounters people or other obstacles, the system protection device will automatically turn on, and the drying pole will stop running for protection.

1.7 Host overheating protection

During the work of the host machine, if the motor runs too many times or for too long, and the internal temperature of the motor rises to 140℃-150℃, the motor overheating protection system will automatically detect and stop running for 20. It can be started after 5 minutes, which can well protect the motor from overload work and ensure the safety of the motor.

 

Circuit diagram (as shown in in manual)

 

Host installation

3.1 Impact drill, Phillips screwdriver, pliers, adjustable wrench, scissors, spare power cord, hammer,

insulating tape, strong double-sided tape, marker, etc.

3.2 Installation steps

3.2.1 Turn off the balcony power first. If there is a balcony light before, turn off the power and remove the balcony light:

3.2.2 Determine the installation position, stick the installation template with sponge glue and stick it on the top of the balcony according to the determined position:

3.2.3 Use an impact drill to drill four 10X80 holes, drive the M8 expansion screws into the ceiling, unscrew the four lower nuts, then tighten the four upper nuts with a wrench, and screw the two lower nuts on the left 5mm away from the upper nuts. -6mm or so.

3.2.4 Remove the left and right end covers of the host, carefully lift up the host, insert the left end of the host on the lower nuts of the two expansion screws on the left as shown in Figure 3.1, then lift up the right side of the host, and insert the two notches on the right. Screw in and tighten the lower nuts on the two expansion screws on the right, and then tighten the two lower nuts on the left.

3.2.5 Correctly connect the super-colored neutral wire and the yellow-green two-color ground wire, then wrap it with electrical tape and stuff it into the gap between the host and the ceiling) Telescopic rack assembly installation.

First install the left telescopic frame assembly on the left end mounting plate of the main unit and fix it with 4 bolts.

Then install the round head of the wire rope through the limiter into the hole of the wire rope hanging buckle. Fasten the wire rope buckle cover of the supplied accessory. (Note: Do not tighten the 4 bolts too much to prevent the pulley from getting stuck and unable to work)

 

3.2.7 Cover the end cover, tighten it with M4*4 screws, and loosen the strapping tape. Use the same method to install the telescopic rack assembly on the other side.

3.2.8 Turn on the balcony power and perform remote control testing (Remote control code matching operation instructions)

When the receiver is powered on, the buzzer beeps… 02. Press the lighting button within 10 seconds and release it for 1 second. 03. Press the up/stop button again within 2 seconds. 04. The buzzer beeps 3 times quickly, indicating that the code is successfully matched.

3.2.9 Assembly of quilt pole and fixed clothes pole

Assembly drawing of quilt pole and fixed clothes pole
Hang the assembled quilt rod and the quilt rod in the fixed clothes rod assembly on the drying rod hook seat
Press the down button on the remote control, lower the clothes hanger to the appropriate position, unscrew the rubber head screws, open the clothes rail fixing buckle, insert the fixed clothes rail, and then tighten the rubber head screws.
Used for quilt poles and fixed clothes poles

This model has two quilt poles and two fixed clothes poles. The main function of the quilt pole is to dry quilts. If you need to dry the quilt, you can remove the rotating quilt pole from the hanging pole hook seat and place it freely vertically, or you can place the quilt pole on the drying pole hook seat.

Debugging

5.1 Press the up button and down button on the remote control to adjust the clothes hanger up and down function.

5.2 Follow the instructions on the function keys to check whether the LED lights are on and off.

5.3 Press the sterilization function button to debug and check whether the disinfection light is on or off (warm reminder: please perform this debugging 3 meters away from the clothes drying rack)

5.4 To test the drying and air-drying function keys, press the air-drying key or the drying key on the remote control and feel with your hands whether there is cold or hot air. The rated working time of the fan is 2 hours.

5.5 Remote control battery replacement

Press the back shell of the remote control with your thumb, press the front shell with the remaining four fingers, and then push it in the direction of the arrow on the back shell of the remote control. The remote control is opened and a new battery is installed.

Precautions

6.1 The ceiling on which the host is installed must be strong to ensure that the expansion screws can be firmly fixed.

6.2 To ensure the safety of electrical appliances, please be sure to ground it. The power cord supplying the host should not be less than 1.5mm².

The installation ceiling should not be prone to water seepage, rain, etc.

6.3 Do not disassemble the host without permission. If there is any fault, please contact a professional for repair. Damage caused by normal use such as damage caused by human factors is not covered by the warranty of our company.

6.4 Try not to use the machine during thunderstorms and keep it closed and resting.

6.5 When the machine is running, it is prohibited to place hands or other objects between the telescopic frames.

6.6 When activating the sterilization and disinfection function, please do not approach the host disinfection lamp for the time being. The rated working time of the disinfection lamp is 30 minutes.

6.7 This product is connected to fixed wiring, and the wire diameter of the fixed wiring is required to be not less than 1 square millimeter. The fixed wiring connected to it must be equipped with its contact spacing according to the wiring rules to provide a full disconnection device under overvoltage level III conditions;

6.8 If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer, its maintenance department or professionals from similar departments;

6.9 The height of the main machine of the clothes dryer from the ground after installation shall not be less than 2.3 meters.